CDL Metal Coil Endorsement Practice Test 2024

CDL Metal Coil Endorsement Practice Test Questions and Answers 2024: Try our free Commercial Driver’s License Permit Test (CDL) Metal Coil Knowledge Test. You can also download PDF for written exam preparation.

As of September 28, 2010, New York and Alabama are the only states that have a special cargo securement endorsement for the CDL. The basic principles of this endorsement are (a) to make highways safer; and (b) to reduce damage to cargo. A metal coil is any product made of a metal that is bulk packaged or packaged as a roll, coil, spool, wind or wrap.

CDL Metal Coil Endorsement Practice Test 2024

Test Name	CDL Practice Test 2024
Language	English
License	Endorsements Permit
Total Questions	25 MCQs
Test For	Commercial Driver License
Test Preparation	Metal Coil Endorsement
Country	USA
Explanation	No

0%

0 votes, 0 avg

236

CDL Metal Coil Endorsement Practice Test

CDL Metal Coil Endorsement Practice Test

1 / 25

What is the WLL of a 2-inch synthetic webbing with no visible markings?

A) 910 kg

B) 910 lbs

C) 4.000 lbs

D) 1,000 lbs

2 / 25

The working load limit of a rub rail is

A) 5,700

B) 3,900

C) Zero

D) 4,700

3 / 25

You should always use a friction mat.

A) True

B) False

4 / 25

An indirect tie down that is used to prevent side-to-side force must make an angle of at least—degrees.

A) 50

B) 80

C) 45

D) 30

5 / 25

Cargo securement is important because

A) serious injury and death could result from falling cargo.

B) All of the above

C) damaged cargo could result in claims against the company and could hurt the reputation and profitability of the company.

D) the customer is paying for safe and timely delivery of the goods.

6 / 25

A 5/8-inch chain with a WLL of 13,000 lbs. should be marked with what strength rating?

A) 10

B) 430

C) 70

D) 3

7 / 25

What is the definition of working load limit (WLL)?

A) Limit of cargo weight a tractor trailer combination can carry

B) The maximum load that may be applied to a component of a cargo securement system during normal service

C) None of the above

D) The amount of weight a trailer can hold

8 / 25

How many tie downs are needed for a row of four coils with eyes vertical?

A) 4

B) 5

C) 6

D) 7

9 / 25

What is the required restraining force for rearward force?

A) 20%

B) 0.5g

C) 80%

D) 0.2g

10 / 25

The working load limit of all components used to block cargo from forward movement must be

A) 70%

B) 80%

C) 50%

D) 60%

11 / 25

What is the total vertical force needed for question 4?

A) 14,292

B) 7,146

C) 28,584

D) 5,716

12 / 25

Based on state and federal regulations, who is responsible for proper load securement?

A) The driver only

B) Both the carrier and the driver

C) The carrier only

D) The shipper only

13 / 25

Direct tie downs provide resistance to oppose the forces that are acting on the cargo.

A) immediate

B) direct

C) indirect

D) friction

14 / 25

A tie down is

A) anything nailed to the deck of a flatbed trailer.

B) another word for duct tape.

C) a cargo securement device that attaches to the anchor point of a flatbed trailer and/or van trailer.

D) when a driver is busy doing something.

15 / 25

The WLL is determined by the DOT.

A) False

B) True

16 / 25

What is the total aggregate WLL to tie down two 15’ steel rolls loaded end-to-end longitudinal to the trailer? Each weighs 14,292 lbs.

A) 5,716

B) 28,584

C) 7,146

D) 14,292

17 / 25

What do you use to keep coils from rolling when on the deck of a flatbed?

A) A system of blocking and bracing to cradle the coil up off the deck

B) 2 indirect tie downs

C) 3 direct tie downs

D) None of the above

18 / 25

How many legal options are there for securing an individual metal coil with eyes lengthwise?

A) 2

B) 4

C) 1

D) 3

19 / 25

Drivers should inspect cargo after

A) 50 miles.

B) 150 miles.

C) All of the above

D) every time they change duty.

20 / 25

What is the total side-to-side force restriction need for question 4?

A) 5,716

B) 14,292

C) 2,8584

D) 7,146

21 / 25

What is the minimum number of tie downs for an article that is 30 feet. long and weight is 1,099lbs?

A) 2

B) 4

C) 1

D) 3

22 / 25

What is the WLL for 3/8 nylon rope?

A) 640

B) 240

C) 1,278

D) 278

23 / 25

The minimum number of tie downs necessary to secure a single coil with eyes vertical is

A) 1

B) 3

C) 4

D) 2

24 / 25

Which means of securement is prohibited when transporting coils with eyes crosswise?

A) One direct tie down through the eye restricting forward movement

B) Attaching direct tie downs diagonally through the eye making an X-pattern

C) All of the above

D) One direct tie down through the eye restricting rear movement

25 / 25

The guiding principle of the metal coil endorsement is to make the highway more safe and

A) make the highway safer.

B) have less damage to cargo.

C) lower the cost of transportation.

D) increase the cost of transportation.

Your score is

The average score is 74%

CDL Knоwlеdgе Test (50 Questions Each)

School Bus Endorsement

Air Brakes Endorsement

Combination vehicles Endorsements

Doubles and Triples Endorsement

Tank Endorsement

Hazardous Material

Passenger Endorsement

Metal Coil Endorsement

CDL Metal Coil Endorsement Practice Test 2024