CDL Metal Coil Endorsement Practice Test 2025

CDL Metal Coil Endorsement Practice Test Questions and Answers 2025: Try our free Commercial Driver’s License Permit Test (CDL) Metal Coil Knowledge Test. You can also download PDF for written exam preparation.

As of September 28, 2010, New York and Alabama are the only states that have a special cargo securement endorsement for the CDL. The basic principles of this endorsement are (a) to make highways safer; and (b) to reduce damage to cargo. A metal coil is any product made of a metal that is bulk packaged or packaged as a roll, coil, spool, wind or wrap.

CDL Metal Coil Endorsement Practice Test 2025

CDL Metal Coil Endorsement Practice Test 2025

Test Name CDL Practice Test 2025
Language English
License Endorsements Permit
Total Questions 25 MCQs
Test For Commercial Driver License
Test Preparation Metal Coil Endorsement
Country USA
Explanation No
0%
0 votes, 0 avg
374

CDL Metal Coil Endorsement Practice Test

CDL Metal Coil Endorsement Practice Test

1 / 25

Based on state and federal regulations, who is responsible for proper load securement?

2 / 25

A 5/8-inch chain with a WLL of 13,000 lbs. should be marked with what strength rating?

3 / 25

What is the minimum number of tie downs for an article that is 30 feet. long and weight is 1,099lbs?

4 / 25

The WLL is determined by the DOT.

5 / 25

What is the total side-to-side force restriction need for question 4?

6 / 25

The working load limit of all components used to block cargo from forward movement must be

7 / 25

The working load limit of a rub rail is

8 / 25

A tie down is

9 / 25

How many tie downs are needed for a row of four coils with eyes vertical?

10 / 25

What is the total vertical force needed for question 4?

11 / 25

What is the WLL for 3/8 nylon rope?

12 / 25

You should always use a friction mat.

13 / 25

Cargo securement is important because

14 / 25

Drivers should inspect cargo after

15 / 25

Direct tie downs provide resistance to oppose the forces that are acting on the cargo.

16 / 25

The guiding principle of the metal coil endorsement is to make the highway more safe and

17 / 25

What do you use to keep coils from rolling when on the deck of a flatbed?

18 / 25

What is the total aggregate WLL to tie down two 15’ steel rolls loaded end-to-end longitudinal to the trailer? Each weighs 14,292 lbs.

19 / 25

Which means of securement is prohibited when transporting coils with eyes crosswise?

20 / 25

What is the WLL of a 2-inch synthetic webbing with no visible markings?

21 / 25

What is the required restraining force for rearward force?

22 / 25

How many legal options are there for securing an individual metal coil with eyes lengthwise?

23 / 25

An indirect tie down that is used to prevent side-to-side force must make an angle of at least—degrees.

24 / 25

The minimum number of tie downs necessary to secure a single coil with eyes vertical is

25 / 25

What is the definition of working load limit (WLL)?

Your score is

The average score is 74%